Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: minimum carb cfm for 350
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 16
  1. #1
    vortec is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    fort worth
    Car Year, Make, Model: 1994 c1500 4.3L, 1982 k5 Blazer 4x4 5.7L
    Posts
    37

    minimum carb cfm for 350

     



    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?

  2. #2
    viking's Avatar
    viking is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Branson area
    Car Year, Make, Model: 23 T, 53 FLH , 66 C-10 454, 03 CVPI
    Posts
    968

    Proper for what, gas mileage, max hp, middle of the road or what, I've run rotten chester 2 jets, up the current twin 500 edel's on a tunnelram on 350's that were in proper tune (ie not running rich or lean), if your going for middle of the road I highly recommend the grant 625cfm road demon.
    Objects in the mirror are losing

  3. #3
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,109

    400 cfm for normal street use

  4. #4
    rumrumm's Avatar
    rumrumm is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    If you are running a stock or mild performance engine, an Edelbrock 600 would be a good choice.


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson

  5. #5
    vortec is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    fort worth
    Car Year, Make, Model: 1994 c1500 4.3L, 1982 k5 Blazer 4x4 5.7L
    Posts
    37

    my original post wasn't all that self explanitory after all. i was in a hurry.

     



    anyway, the engine is pretty much stock. low-end torque is where i have my fun (rock crawling). it only sees high rpms in the mud. i can get a good deal on a 470cfm truck avenger, so the quadrajet might find a new home on top of a 396 in a 1970 chevelle, assuming the guy will budge on the price. it's a sweet car, IMO, even though it's not a true ss.

  6. #6
    chevydrivin is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    mccomb
    Car Year, Make, Model: 55 belair: 68 Camaro: 69 F100: 51 M37's
    Posts
    287

    Cfm=cidxrpmxve/3456

    476cfm=350x4700x1/3456

    Around 100 Cfm More For Every 1,000rpm Over Above Numbers
    600cfm.....6000rpm+/-
    700cfm.....7000rpm+/-

  7. #7
    chevydrivin is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    mccomb
    Car Year, Make, Model: 55 belair: 68 Camaro: 69 F100: 51 M37's
    Posts
    287

    Cfm=cidxrpmxve/3456

    476cfm=350x4700x1/3456

    Around 100 Cfm More For Every 1,000rpm Over Above Numbers
    600cfm.....6000rpm+/-
    700cfm.....7000rpm+/-

  8. #8
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    CID X MAX. RPM THEN DIVIDE BY 3456.

  9. #9
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    CID X MAX. RPM THEN DIVIDE BY 3456.

  10. #10
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    CID X MAX. RPM THEN DIVIDE BY 3456.

  11. #11
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    Cubes x max. rpm divide by 3456.

  12. #12
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    cid x max. rpm's divide by 3456.

  13. #13
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by vortec
    pretty self explanitory. how many cfm does it take to properly run a 350 (1982, currently with qjet)?
    cubes x max. rpm divide by 3456.

  14. #14
    Rrumbler is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2004
    Location
    Las Vegas
    Car Year, Make, Model: Sans hot rod, sold the truck.
    Posts
    1,207

    What happened, there, Eric?? Got buck fever??

  15. #15
    billlsbird is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2004
    Location
    Pahrump
    Car Year, Make, Model: '32 Ford 3 Window Coupe w/ 392 Hemi
    Posts
    916

    Quote Originally Posted by erik erikson
    cubes x max. rpm divide by 3456.
    ....what about the 've'??? Or is it 'close enough' to just figure ve at 100%??? Bill

    ve = volumetric efficiency....
    Last edited by billlsbird; 08-12-2006 at 09:08 PM.

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink