-
10-13-2003 10:25 AM #1
Damage to Fiberglass HOod! Need Help
I need some help. I have a Fiberglass hood on my 1969 chevy nova. my question is my mechanic put the wrong springs on the hood so well my hinges broke from the hood. How can i replace the hinges without having to replace the hood all together?it did make a hole in the hood but it didnt go completly through.can my hood be fixed instead of completly replaced? i need help!!!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-13-2003 11:04 AM #2
Remove the springs completely and use a prop rod to hold the hood open when necessary. As for repair, based on the situation described you should have a professional fiberglass repair facility fix the hood. The answer to your repair/replace question will be based on how much they will charge for the repair. Then you do the math.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
10-13-2003 08:11 PM #3
Are there any boat shops near where you live? They will specialize in fiberglass repairs.
-
10-14-2003 05:22 AM #4
Fiberglass repair is quite easy to do. I would go to your local book store & buy a book on fiberglass repair....they can also be bought at www.amazonh.com or from www.corvetteforum.com or www.digitalcorvette.com
You could also do a search using google on fiberglass repair...DonDon Meyer, PhD-Mech Engr(48 GMC Trk/chopped/cab extended/caddy fins & a GM converted Rolls Royce Silver Shadow).
-
10-14-2003 08:34 AM #5
Thank you for all your guys information. No there isnt any boat shops near me. I can just check the internet to see what i can find. Thank You!Dont ever drink and drive, you never know who's life you'll take.
NORMA JEAN AVILA
1983-2003
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit