a few issues all at once.
First off I was having problems seeing oil on my dipstick so I put a butt load in and now I have way to much oil. Around the same time I started seeing quite a bit of steam coming out of the breathers and have lost all oil pressure.
other than adding alot of oil the only things I have done is change spark plugs and play with the carb, fuel/air and idle.
Also, does anyone know of any good tools, write ups for carb tuning?? I have an edelbrock performer if that helps.
Re: a few issues all at once.
Quote:
Originally posted by nystreetscene
First off I was having problems seeing oil on my dipstick so I put a butt load in and now I have way to much oil. Around the same time I started seeing quite a bit of steam coming out of the breathers and have lost all oil pressure.
other than adding alot of oil the only things I have done is change spark plugs and play with the carb, fuel/air and idle.
Also, does anyone know of any good tools, write ups for carb tuning?? I have an edelbrock performer if that helps.
How much is a butt load?
Re: Re: a few issues all at once.
Quote:
Originally posted by erik erikson
How much is a butt load?
hmmm please do not tell us :HMMM: i had to say that. you need to get the butt load out .to much will just get beat out by the crank pull the pan plug out drain some out put plug back and check it
Re: Re: Re: a few issues all at once.
Quote:
Originally posted by pat mccarthy
hmmm please do not tell us :HMMM: i had to say that. you need to get the butt load out .to much will just get beat out by the crank pull the pan plug out drain some out put plug back and check it
So is a butt load 8 qts. in a 5 qt. system or is it 9 either way loose some oil.
Re: Re: a few issues all at once.
Quote:
Originally posted by erik erikson
How much is a butt load?
that is about (2, 55 gallon barrels worth of stuff.)
thats a lot of motor oil. :HMMM: :LOL: