Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Edel Carb Help
          
   
   

Results 1 to 3 of 3

Threaded View

  1. #1
    trenchdog73's Avatar
    trenchdog73 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Chicago
    Car Year, Make, Model: 1973 Chevy Nova
    Posts
    71

    Edel Carb Help

     



    Edelbrock Thunder Series AVS 650 cfm carb. Well i thought it might be running a bit rich and dumping too much fuel off the line causing a crappy launch, so i went to adjust it. I turned the fuel/air screw all the way in and the car was still running with little to no change. If i recal right from my manual the car should die then I should turn out a bout 1.5 times until I get a stong idle for a lean mix. Is this correct? the driverside screw did not cause the car to turn off but did have more of an effect on the idle the the passenger side screw, could this be a sign of a problem with the carb or something else? The carb is 2 months old and if its bad I think i have a few calls to make, So anyhelp would be appreciated,
    Last edited by trenchdog73; 04-26-2005 at 04:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink