Thread: 351 Cleveland help wanted
Results 1 to 5 of 5
Threaded View
-
08-30-2003 08:30 PM #1
351 Cleveland help wanted
The e-bay auction said this:
THE ENGINE IS A 351 CLEVELAND WITH THE FOLLOWING PARTS:MALLORY DISTRIBUTOR,HOLLEY CARB LIST 1950,EDELBROCK F351 ALUMINUM INTAKE,MALLORY WIRES,WAS TOLD IT HAS A PAW ENGINE KIT,NEW CRANK,NEW RODS, NEW PISTONS,BORED OVER,9133M SUPER STOCK CAM,RING BEARING ,TIMING CHAIN ETC..DO NOT KNOW IF IT IS A 4 BOLT OR 2 BOLT BLOCK BECAUSE I HAVE NOT SEEN THE INSIDE OF THE ENGINE.WAS TOLD IT WAS A 4 BOLT..BUT I DO NOT KNOW HOW TO TELL FROM THE OUTSIDE
That is all I know about it. Ford engines are not my thing, and this one doesn't like to run. It hates to start, and when it does start, it wants to die. It likes to flood out. We were able to drive it a little by proping open the 3&4th barrels on the carb. I didn't know if the gas had turned to varnish in the carb, or what. Any info on why it is acting the way it is would be appreciated.
P.S. pic of engine can be seen in my gallery.
there is no such thing as used parts for a pinto so i had to create some .. i searched ebay for a similar clutch pedal setup and found a mid 90`s ford ranger to be the closest thing i could work...
random stuff