Thread: carb question
-
12-22-2004 10:20 AM #1
carb question
I have a BG speed demon mech secondary carb. I bought it from a friend that had it on his show truck. He decided to go edelbrock. Anyway, I am having a problem with the secondary squirter leaking, while running and after shutdown. I have adjusted the float lever and also have removed the bowls and metering blocks but found nothing visibly wrong. Anybody here have any suggestions
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-22-2004 11:24 AM #2
thank you, I have a rebuild kit coming for the carb I will check that needle at that time
-
12-22-2004 04:56 PM #3
well I have a lot of experience with Holley carbs but was a bit unsure about this Demon. Like I said I bought it from a friend who took it off his show truck. Thanks for the info. I took the float levels down and flushed out any crud that may have been under the squirter check valves... Seems to have done the trick for now..
thanks
I had to go to the doctor's this morning. He told me that my sugar was too high so I came home and put it on a lower shelf. I feel better already.
the Official CHR joke page duel