Thread: SBC 14102193 Heads
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
11-13-2004 07:01 PM #1
Registered User
- Join Date
- Nov 2004
- Location
- Richwood
- Posts
- 1
SBC 14102193 Heads
Has anyone done a burrette cc check on the GM 14102193 Head yet? The chamber size seems to be a well kept secret! I know these heads have a swirl casting on the intake side which helps in low end torque, but hard on higher rpm's. Does this make a good cantidate say for a 4 x 4 truck?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-13-2004 07:47 PM #2
CHR Member
- Join Date
- Aug 2004
- Location
- Nortonville
- Car Year, Make, Model: 72 Chevy pickup/67 International pickup
- Posts
- 369
that head was made from 87up 305/350 1.94"/1.5" valves
you can do your own search at MorTec.comDan
Home page http://www.danstrucks.4t.com
dont have anything good to say/(type) dont say/(type) NOTHING AT ALL..........(figure out the rest)....
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance