Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: SBC 14102193 Heads
          
   
   

Reply To Thread
Results 1 to 2 of 2
  1. #1
    chevieg is offline Registered User Visit my Photo Gallery
    Join Date
    Nov 2004
    Location
    Richwood
    Posts
    1

    Question SBC 14102193 Heads

     



    Has anyone done a burrette cc check on the GM 14102193 Head yet? The chamber size seems to be a well kept secret! I know these heads have a swirl casting on the intake side which helps in low end torque, but hard on higher rpm's. Does this make a good cantidate say for a 4 x 4 truck?

  2. #2
    TRUCKGUY's Avatar
    TRUCKGUY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    Nortonville
    Car Year, Make, Model: 72 Chevy pickup/67 International pickup
    Posts
    369

    that head was made from 87up 305/350 1.94"/1.5" valves

    you can do your own search at MorTec.com
    Dan

    Home page http://www.danstrucks.4t.com

    dont have anything good to say/(type) dont say/(type) NOTHING AT ALL..........(figure out the rest)....

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink