Thread: 283 cam advice
Hybrid View
-
10-30-2004 09:02 PM #1
283 cam advice
Need some help.I have a stock 283 with I think power pack heads cstng 3884520 60cc with 1.72 &1.5 valves.They are getting hardened seats put in them.I am running an alum. intake and a 4barrel quadrojet with a 350 turbo.This is going in my 32 three window coupe,the weight will be aprox 2600 lbs,278 gear.OK so I need some advice on a cam.I want to keep the power in the low end maybe with just a little bit of thump,but I don't want to have to worry about it pushing me thru the stop light at idle.Would like to use something from speed pro.So needs some specs.Thanks Mike (ps will be running hei with high output coil)
-
10-30-2004 09:28 PM #2
OK I will go with the low end torque
-
10-31-2004 06:13 PM #3
comp cams 280 h worked great for me. my 283 was bored .125 over was a good alla round cam drag racing and street. may i suggest at least 355 gears
I had to go to the doctor's this morning. He told me that my sugar was too high so I came home and put it on a lower shelf. I feel better already.
the Official CHR joke page duel