Thread: encourage bbc 509ci
Results 1 to 15 of 35
Threaded View
-
12-11-2017 11:42 PM #1
encourage bbc 509ci
Hello guys
i build big block 509ci, 10.3 compress,
rear gear(stock impala67) - 2.73
th400 with stock converter(stock stall speed)
engine idle^550-650rpm
I have a manifold Edelbrock 7161 range 1500-6000rpm, oval port, Dual plane.
heads: Edelbrock Performer RPM Cylinder Heads 604519
carb: edelbrock 750cfm
when i start - i think that i have small block, wheel not slip. but I dont like hi rpm and camshaft 3000-7000rpm, I only want medium power, because i used car on street every day.
today I have a camchaft COMP Cams 11-407-8(range idle-4600rpm, lsa110, Dur050 Lift: 200/206, 0.510 int./0.510 exh.
i whant buy new camshaft: edelbrock 2263 . Range: 1,500-6,500, Dur050 Lift: 248 int./256 exh, LSA112, 0.629 int./0.643 exh.
Maybe this Cam aggressive ?
WHAT you say?
1. whats will idle?
2. i must replace trans converter? which? stall speed 1800, 2000, 2500?Last edited by Alex-grand; 12-11-2017 at 11:53 PM.
I got the Skyjacker hydro shocks on and they are as soft as I'm going to get. It still rides kind of firm but better. One of the main issues is the front is about a 1/4 off it's bump stop, the lack...
Stude M5 build