Thread: dipstick diverter??????
Results 1 to 9 of 9
LinkBack URL
About LinkBacks-
04-19-2004 06:54 PM #1
CHR Member
- Join Date
- Apr 2004
- Location
- over here in johnsonville
- Posts
- 12
dipstick diverter??????
Anybody ever heard of a dipstick diverter in the oil pan on a small block 400???
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-19-2004 07:33 PM #2
CHR Member
- Join Date
- Apr 2003
- Location
- Holly, Mi.
- Car Year, Make, Model: various 1924-91
- Posts
- 223
Yes it is the tube that fits thru the dipstick hole. It keeps the dipstick from hitting the crankshaft.
-
04-19-2004 08:58 PM #3
CHR Member
- Join Date
- Nov 2003
- Location
- Nampa Idaho
- Car Year, Make, Model: 81 Chevy Pick-up
- Posts
- 94
i hate that when the dipstick hits the crank i broke a dipstick that way. its also about 2 to 3 inchs long. so ive seen
Cd
-
04-20-2004 03:32 AM #4
CHR Member
- Join Date
- Nov 2002
- Location
- .
- Car Year, Make, Model: .
- Posts
- 631
I should have checked your other post I didn't know you already threw a tantrum and quit. I can't believe you didn't check your oil before asking about the tapping noise. I hope the guy who built your engine knows you've been running it without oil so he doesn't have to take any of your crap. With your attitude I'm guessing he already told you to F#%* off and that's why you showed up here.Last edited by The Al Show; 04-20-2004 at 05:01 AM.
" Im gone'
-
04-20-2004 07:16 AM #5
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,856
Thanks Al, I hadn't noticed his other thread.
Maybe CHR needs a "dipstick diverter".
Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
04-20-2004 07:36 AM #6
CHR Member
- Join Date
- Oct 2003
- Location
- North Kitsap County/Washington State
- Car Year, Make, Model: 1965 Chev C-10/300HP 292L6
- Posts
- 304
A good way to divert unwanted dipsticks that come along and bother ya is with a very large gun..!!....
The cylinders have to be inline.!!!
-
04-20-2004 09:14 AM #7
CHR Member
- Join Date
- Mar 2004
- Location
- Anita
- Car Year, Make, Model: 55 Ford F100 w/390,
- Posts
- 1,095
INLINE, you are so right. I saw his other post and replied to that. This dipstick is loose.Duane S
____________________________________
On a quiet night you can hear a Chevy rust
-
04-20-2004 08:04 PM #8
CHR Member
- Join Date
- Apr 2004
- Location
- over here in johnsonville
- Posts
- 12
I'm back..... Did you miss me? I sent Bill a PM and ask him not to remove me.... After going to the can to think about it I realized this is actually fun..... I guess you all are right, inline I apoligize for what I said..... Street if you read this I owe you one too.... I will quit posting and start reading..... Well back to the can and check on my Johnson Rod.......
-
04-20-2004 09:32 PM #9
CHR Member
- Join Date
- Oct 2003
- Location
- North Kitsap County/Washington State
- Car Year, Make, Model: 1965 Chev C-10/300HP 292L6
- Posts
- 304
Right on there Cutnitclose.!!.....Ya got Mono lube in the can to take care of your Johnson rod.??...No ..it don't come in a can...the can in your house..!!.....JHC....this is getting....er ...ah.....like ..........Hell I forgot again...
The cylinders have to be inline.!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel