Thread: Compression Fittings for steel fuel line

Tweet

That is correct Roger. The lines will be fully assembled when they are coated. I will fully clean the inside of the tubes, assemble the steel adapter fittings, pressure test the assembly, plug the ends and have them coated. Should work well.
Mark

Originally Posted by astroracer

That is correct Roger. The lines will be fully assembled when they are coated. I will fully clean the inside of the tubes, assemble the steel adapter fittings, pressure test the assembly, plug the ends and have them coated. Should work well.
Mark

Yep, can't argue with that approach! I was thinking of powder coating the tube, then installing fittings, which wouldn't work so good; or even installing the fittings and trying to mask them from the coating, which definitely wouldn't work so good. Had me scratching my head a bit, so I asked!! Thanks for responding.