Thread: SBC Identification
Results 1 to 3 of 3
Threaded View
-
02-15-2012 06:21 AM #2
Take some carb cleaner and clean off the block casting numbers above the flywheel real good.Then take some chalk and rub it over the numbers and wipe the chalk off and those numbers will pop right out so you can read them.Good Bye





LinkBack URL
About LinkBacks
Reply With Quote
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!