Thread: rough running 350
-
08-25-2011 05:31 PM #1
rough running 350
I have a 350 engine freshly rebuilt with a MSD 8360 distribator and a lunati cam with a 489-504 lift. The engine will start but runs rough and won`t Idle. No matter wich plug wire I hook the timing lite on it is all the same. Is there something with the distribator that I am missing? I would appreciate any help. thank you
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-25-2011 06:08 PM #2
Start with the basics. Here is an article that I wrote for another forum that will help you get started.
http://www.crankshaftcoalition.com/w...stment_SBC/BBCPLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
08-25-2011 06:42 PM #3
Tech good to see you back. tryed to pm but itv says your box is full
lol CharlieCharlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
08-25-2011 06:53 PM #4
-
08-25-2011 07:28 PM #5
times three. missed youBARB
LET THE FUN BEGIN
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance