Results 1 to 6 of 6
LinkBack URL
About LinkBacksThreaded View
-
02-04-2011 01:26 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
i have a cam thats new Erson hyd that will work new 4/7 swap or i a have a comp that would work as well but solid roller i would go team G intake .3500 is about all the stall you need for the cam i have you should use the race roller lifter that has the short valving in the lifter for hi rpm .i would go with a small rect port head if your dumping Nos . with that hi of stall and Nos you may be working abit past them heads with the RPM intake but thats the way i see it you have a intake .gear and stall. heads but not a cam thats abit backwards from the way i do it . i not the king of the bbc engine but i built many from 396 to 632+
Last edited by pat mccarthy; 02-04-2011 at 01:51 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!