Thread: 1st time engine builder.

Tweet

more info please on what heads, valve size, exhaust pipe size, what edelbrock intake, rear gear, carb, pistons....lots of variables....most wont answer bc of the vague list given

Start by telling everyone what you want to do with the vehicle. If you know for a fact they have never been rebuilt than get the casting numbers off the block and heads and post it with the info requested above. Maybe someone will get it started for you.

Only thing I would question in that mix is the race Demon carb.

Don

On the first time of assembly I would suggest you turn off the whole world outside.Check a number of times the clearances and take as much time as it takes to get it right.No cell phones,NO BEER,no tv's,maybe a radio,no friends to distract you from a total focus on what your doing in a locked door garage.

And if you get stuck on something,there are no dumb questions.Ask here and you will find the needed support.

Originally Posted by Itoldyouso

Only thing I would question in that mix is the race Demon carb.

Don

X2 - This is NOT a street carb. There are multiple Holleys and my favorites, several Edelbrock Performers for the street that can be easily tuned.