Thread: 302 Clevor build?
Results 1 to 15 of 21
LinkBack URL
About LinkBacksThreaded View
-
08-14-2010 10:46 AM #3
CHR Member
- Join Date
- Dec 2003
- Location
- Pahrump
- Car Year, Make, Model: 1947 International Pick Up
- Posts
- 3,188
You are suppossed to use a 289 rod in a clever motor with a cleveland type piston.
The 2V heads are better for the street, but if money is not an issue I would go with the after market head that Dave Severson metioned on here before.
It's alot better breathing head with both bottom and top end, In other words the best of both worlds. But they are about $2,000 for a set of those. Here is the thread by Dave Severson on the heads, this is the link below.
http://www.clubhotrod.com/forums/showthread.php?t=45458
KurtLast edited by vara4; 08-14-2010 at 10:56 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I'm happy to see it back up, sure hope it lasts.
Back online