Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show


Thread: Issue with timing... Help ...

Reply To Thread
Results 1 to 2 of 2
  1. #1
    kens383stroker is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2010
    West Frankfort

    Issue with timing... Help ...


    I have a 383 Stroker engine, 557, Aluminum heads. Aluminum roller rockers. Had a HEI, Went with a ProBillet Dist. New coil, wires,Mallory 6AL box, All new. Pulled The dist. took of valve cover rotated engine till #1 Cyl Both vales are Closed, (Rockers UP). #1 is at TDC. Drop the Dist. in , Its pointing at #1 Cyl. Cranks and it will hit but not run? Could this be The degree on the cam??? Ive TRIPLE checked everything. Please Help.......
    Last edited by kens383stroker; 02-22-2010 at 07:24 PM. Reason: delete messege

  2. #2
    Bruce lee is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Feb 2009
    Car Year, Make, Model: 27 Ford Roadster

    Read the other post of yours

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink