Thread: Here I am Again Part 1:2
Results 1 to 12 of 12
LinkBack URL
About LinkBacksThreaded View
-
02-26-2009 11:49 AM #1
CHR Member
- Join Date
- Aug 2007
- Location
- Brownsville
- Car Year, Make, Model: 2006 Nissan Titan, 2007 Traxxas T-MAXX
- Posts
- 113
Here I am Again Part 1:2
Hey fellow gearheads
again, I ask for your knowledge to enlighten a dark subject.
check out cyliinder 6 rockers in the enclosed pics. this is the same motor that was bending pushrods earlier.
are the pushrods supposed to be so close to the sides of the head? do you see anything else wrong, besides the rocker and rods?
I have a few ideas of what could be causing this kind of failure, but I would like to hear what you guys have to say first.
I still wish I built this motor first... arg! this is getting annoying and very expensive!
Thanks Again
-CJPCarry On My Wayward Son
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build