- 
	11-28-2008 01:37 PM #1
engine ?
i am new to this im getting a 31 ford coupe and dont kno wat kind of engine i should get i was thinking of just getting a block and building that up with all high pro parts i want at least 450 hp of the engine so if neone could help me out with wat size of an engine i should be looking at the help will be greatly app. also when doing a hot rod you have to re weld the engine mounts for the spef. engine rite?
 - 
    
    
Advertising
                - Google Adsense
 - REGISTERED USERS DO NOT SEE THIS AD
 
 - 
	11-28-2008 06:23 PM #2
yup, takes special mounts.... You'll also have to do some frame work on that old A to get it to hold the power of a modern engine. Then with the added power, you're going to need to update the suspension, brakes, fuel, and electrical systems..... Lots more to it then just dropping in a big V-8....Yesterday is history, tomorrow is a mystery, Live for Today! 
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
 - 
	11-28-2008 07:00 PM #3
do a bunch of reading....go to the library and check out a few books..go buy a bunch of Hot Rod,car craft mags.....
 - 
	11-28-2008 08:26 PM #4
Your very best investment at this point will be to spend 14 bucks for this book....
http://www.amazon.com/gp/offer-listi...7929104&sr=1-1PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE. 
 
Welcome to Club Hot Rod!  The premier site for 
	everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.  
    
     
            
- » Members from all over the US and the world!
 - » Help from all over the world for your questions
 - » Build logs for you and all members
 - » Blogs
 - » Image Gallery
 - » Many thousands of members and hundreds of thousands of posts!
 
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show





		
		
 LinkBack URL
 About LinkBacks
 Reply With Quote
			
		
I'm happy to see it back up, sure hope it lasts.
Back online