Thread: ? needing to re-ring one piston
Hybrid View
-
05-06-2008 01:57 PM #1
did do a leakdowm test with 100psi of air on a warm motor, tdc, was blowing into the oil pan. tore the block down, piston had oil on it, every thing on piston "look's" o.k.??? putting new rings on it, honed the cylinder. will post back afther firing it back up. has anyone ever heard of one piston not seating afther a rebuild???
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40