Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Hand Lapping Valves
          
   
   

Reply To Thread
Results 1 to 12 of 12

Hybrid View

  1. 03-28-2007 05:13 PM #1
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    cuting them would be the best. like matt said a basic 3 angle valve job.30 45 60
    Reply With Quote Reply With Quote
  2. 03-28-2007 06:52 PM #2
    threearmsinjune
    threearmsinjune is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianapolis
    Car Year, Make, Model: 79 shovel, 65 pan
    Posts
    133

    3 angle valve job

     



    I believe my 350 heads were cleaned, seats cut and valves ground for about $130. You may need other parts such as springs if yours are worn. It may bite a bit into the cashflow now, but it is worth it in the long run if you look at time invested and all that.
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink