Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
02-05-2007 04:03 PM #3
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
the springs should have a shim under them they are hard. if no shims then the springs will cut in to the iron or alum head. i use VSI shims they have a top and a bottom to them or cups or hats that hold the springs in place. shims can get cut in by the end of the springs in time but you should not see grit in the oil . it sounds like the to me you lost some rocker balls ? or some did not set up your springs rightLast edited by pat mccarthy; 02-05-2007 at 04:51 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build