Thread: 283 cam advice
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
10-30-2004 09:02 PM #1
CHR Member
- Join Date
- Oct 2004
- Location
- New Richmond
- Car Year, Make, Model: 32 three window
- Posts
- 7
283 cam advice
Need some help.I have a stock 283 with I think power pack heads cstng 3884520 60cc with 1.72 &1.5 valves.They are getting hardened seats put in them.I am running an alum. intake and a 4barrel quadrojet with a 350 turbo.This is going in my 32 three window coupe,the weight will be aprox 2600 lbs,278 gear.OK so I need some advice on a cam.I want to keep the power in the low end maybe with just a little bit of thump,but I don't want to have to worry about it pushing me thru the stop light at idle.Would like to use something from speed pro.So needs some specs.Thanks Mike (ps will be running hei with high output coil)
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-30-2004 09:28 PM #2
CHR Member
- Join Date
- Oct 2004
- Location
- New Richmond
- Car Year, Make, Model: 32 three window
- Posts
- 7
OK I will go with the low end torque
-
10-31-2004 06:13 PM #3
CHR Member
- Join Date
- Mar 2004
- Location
- Lawrence
- Posts
- 3,261
comp cams 280 h worked great for me. my 283 was bored .125 over was a good alla round cam drag racing and street. may i suggest at least 355 gears
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project