think iv come to a conclusion though.... going to go with set up 42 from ryans web site there but gonna add a carb spacer, bigger cam and use the rp air gap.... any other sugestions?
Printable View
think iv come to a conclusion though.... going to go with set up 42 from ryans web site there but gonna add a carb spacer, bigger cam and use the rp air gap.... any other sugestions?
Quote:
Originally Posted by erik erikson
havent had one fail yet :D
Try shoving some compression and some rpm's in there and see what happens.Quote:
Originally Posted by gassersrule_196
It is not a question of if, it is a question of when:whacked: :HMMM:
It is o.k..but I.M.O. the heads are to big.Quote:
Originally Posted by BinJim
I would look at heads that have a port volume of 180 cc.
well if 12:5-1 compression and 7500 or more rpm's doesnt count i dunno what does. btw the old 301 that was before this one was drag raced every single weekend and street driven for about 8 or 9 years and it was very consistent, it finally spun a bearing because it still had the front sump nova v8 oil pan on it! the walls were perfectly fine for another rebuild. so what do i know:rolleyes: ................ woo hooo 1400,dredth post!Quote:
Originally Posted by erik erikson