I was thinking the RPM Air Gap would be great on the street,and maybe a open plenum intake would be best on the track.Unless you have like a real heavy vehicle.
Printable View
I was thinking the RPM Air Gap would be great on the street,and maybe a open plenum intake would be best on the track.Unless you have like a real heavy vehicle.
i do want the higer torque but i then also will be running the higher hp on those combos that he showed. so then those will be able to run on pump then right ? casue i really dont want to have to be restricted to only race fuel. i would like to keep the rpm air gap cause its range is i believe idle to 5500 or so.
You can also spin it faster.Quote:
Originally Posted by BinJim
yournew and want to bui,d a 383, who doesnt:LOL:
It is always better to int. balance.Quote:
Originally Posted by southerner
For one thing you don't have to run that heavy harmonic balancer on the snout of the crank.
You don't,that's who.:LOL: :LOL: :DQuote:
Originally Posted by gassersrule_196
Nope, "thin-wall Scooter" doesn't want one :LOL:
Quote:
Originally Posted by erik erikson
at least i can do things with stuff people have thrown away and then whip there arse:LOL: i had a 383 it ran 13.50's without nitrous :LOL:
Why do you call him "thin -wall"???Quote:
Originally Posted by techinspector1
you mean you dont know what motors i use and the evil things i do to them
? :O
The September 2006 issue of Hot Rod Magazine had an article regarding building a 500hp 383 for a $5000 budget (is that $2,000,000 Canadian?).
HRM is notorious for lying about horsepower, torque, cost, part sources, part specifications, etc. so you can believe that whatever they did will cost more for you since you dont have "friends" giving you stuff like they do.
mike in tucson
Scooter loves to bore those 283 blocks out to 4.00" :LOL:Quote:
Originally Posted by erik erikson
Yes,I know.Quote:
Originally Posted by techinspector1
I was just trying to give him a hard time.
Can you say sonic check please??
exchange rate is only 1.15 so ur all mighty dollars isnt that far ahead of ours :P
Take off eh.:LOL: :whacked:Quote:
Originally Posted by BinJim