Thread: Bent pushrod?
Results 1 to 7 of 7
Threaded View
-
09-09-2006 12:23 PM #3
Okay, I guess I'm thinking in the right direction here. The rockers & rods are stock 5.0 HO (92 Stang). I was careful not to over-rev. Threw shifts at 5,500.
I had an 8.18 (86.5 mph) at the 1/8th and clocked out with a 14.69 (91.27 mph). Not bad on 7 cylinders. Should have been in high 12's.
The part that hurts was it was a first run after 2 years of planning, building, planning again, building again. I'm sure you know how that works!





LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!