Thread: Fan belt problem
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
08-27-2006 06:52 AM #1
CHR Member
- Join Date
- Aug 2006
- Location
- colorado springs
- Car Year, Make, Model: 78 datsun 280z sbc 350 powered
- Posts
- 40
Fan belt problem
Well my fan/alt belt keeps flipping over and i can figure out why . Ive checked all 3 pulleys line up the water pump pulley seems to wobble a bit not sure why all the bolts are tight and the pulley isnt damaged or doesnt seem to be . .
I finally bougth the thinest belt i could find for a lawnmower and it hasnt fliped over yet . The alt and water pump pully are the same width groove but the crank pulley grove is a bit thinner is this the problem .
Jason
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-27-2006 11:04 AM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Jason, have you laid a straightedge on the face of the pulleys or are you just sighting by eye? Get a good, straight yardstick from the hardware and check the pulley alignment again.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
08-27-2006 11:30 PM #3
CHR Member
- Join Date
- Feb 2004
- Location
- san diego
- Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
- Posts
- 1,527
also see if theres any shaft wobble on your water pump.... could be early signs of it going out...just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
If using stock oil pan the capacity is 4 quarts plus 1 for the filter. Five quarts is pretty standard for initial fill. Don't overfill as the crankshaft hitting the oil reservoir will cause foaming...
SB distributor won't fit