Well, I have some good news and some bad news. The bad news is, your blower is not suitable for any V8 application. The good news is, you now have a very interesting door stop.

I called BDS and ran it by them. The man said he offers his condolences, but these are just not suitable for anything but a 2 cyl or 4 cyl engine, and not even then. No one does anything with them except B and M and Weiand, and they only use the rotors out of them, not the cases. In addition, no one makes a 360 manifold for this setup.

He said using this blower on a 360 would be "like a pimple on an Elephants a**."

We've all bought stuff that seemed like it was a good deal, but later turned out to be a loser. Hope you didn't pay too much.


Don