Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Which Fuel Inj. to buy...
          
   
   

Reply To Thread
Results 1 to 15 of 30

Hybrid View

  1. #1
    robot's Avatar
    robot is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Tucson
    Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
    Posts
    2,334

    hcar, the stack injection looks really nice but does have some problems with initial setup and holding adjustment for the long term. I have $5200 in ours so far so it isnt a cheap solution.

    Throttle body injection (TBI) is a poor man's fuel injection. The GM version runs 14 or so psi and squirts into the throttle body so there arent 8 injectors. The TBI is kinda half way between a carb and fuel injection. Positives: cheap, simple, can cobble one up using stock parts. Cons: not as fuel efficient as real injection, uglier than a pig, not very tuneable

    Fuel Injection runs >40 psi and can be either a factory job or an aftermarket unit. The common factory jobs for the SBC are the tuned port and the ramjet. The tuned ports are cheap now, a lot of people hack the code so the controller is easy. Parts (sensors) are at the Chev dealer. The ramjet uses a Mercury Marine controller (MEFI4) and is similar looking to the old Rochester units from the 50's and 60's. Arizona Speed and Marine sells a unit similar to the GM unit. Both work really well at lower revs (5500 and under).

    After market units seem to be everywhere now. If you go this route, make sure that the unit has oxygen feedback (O2 sensor). Most of the units that feature "no computer" adjustablility are pretty limited in their abilities and are pretty crude controllers. A good controller vendor will recommend your cam basics, ask a bunch of questions about your motor, and will program the controller for your application.

    Expect to spend at least $2K for a respectable setup or up to $6K for something like the Roush stack injection.

    Injection is really nice for street vehicles.
    mike in tucson

  2. #2
    ewingr's Avatar
    ewingr is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Lawrence
    Car Year, Make, Model: 1956 Chevrolet Convertible
    Posts
    64

    Selections...

     



    Robot

    Do you know of any comparison information on varying systems? I was thinking of the Holley Stealth Ram. I know it does have computer programming (I'm not knowledgeable enough to know much about how goot it is) and has 0xygen support.

    If I start getting towrad 6K, I would rather sell my engine with the blower and put in an LS1. It would ultimately cost me more than 6K, BUT 6k would be a good start on it.
    Thanks
    Roger

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink