Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: what is a burnt valve?
          
   
   

Reply To Thread
Results 1 to 14 of 14
  1. #1
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    what is a burnt valve?

     



    When a valve is burnt what actually happens to it that screws it up?
    Does it get warped or something? Or does some of it actually erode away?

  2. #2
    C9x's Avatar
    C9x
    C9x is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    N/W Arizona
    Car Year, Make, Model: Deuce Highboy roadster
    Posts
    1,174

    One way to look at it is that it's less than perfectly circular.

    It does indeed lose material and can no longer seat properly - properly defined as on the seat the full 360 degrees of seat circumference.

    Most times, the exhaust valve burns.
    ID'd by mild backfiring/popping when the fresh fuel/air mix gets ignited early.

    Leaking intake valves make an engine run rough - as does the burned exhaust valve - but doesn't do the backfiring bit.

    Easy to understand why exhaust valves burn when you realize the normal operating temperature for them is red-hot.

    Lack of time on the seat - so as to transfer heat - is usually what burns an exhaust valve.

    Too many valve grinds on an exh valve make it too thin and create the potential for a burned valve.

    If your valve job is fresh and the valves weren't too thin - auto shop machinists will usually reject thin valves so you're probably ok there - you may want to take a look at valve adjustment.
    And check compression somewhere along the way.
    C9

  3. #3
    76GMC1500 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Posts
    1,176

    Yes, they actually errode away.

  4. #4
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    I tried the towel across the exhaust method you mentioned before (I couldn't find that thread again), I'm not sure if I have burnt valves or not. I don't really have anything to compare the towel action to. The exhaust definitely does not come out smoothly though, it comes out in bursts much more violent than my fuel injected modern cars.

  5. #5
    robot's Avatar
    robot is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Tucson
    Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
    Posts
    2,334

    Instead of a towel, I was taught to do the test on the exhaust pipe with a dollar bill....if it always blew away from the end of the pipe, the valves were OK, but if it sucked the dollar against the end of the pipe, that meant that it was going to suck many dollar bills out of your pocket.

  6. #6
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    ohhhhhh,
    ok. I misunderstood the test. I think I'm ok in that case.
    I'll try it again with a $20 just to make sure.

  7. #7
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    welp, I had my truck out this weekend and I figured I'd hold a bill there and see what happens. Long story short, I ended up with half a dollar in my hand, the other half got ripped right off so I guess I have burnt valves.
    I'm gonna have to get a valve job on those f'ers, but for the future, is there any way to know what caused this?
    I don't want to do all the work to get these heads off and back on again and have this happen again.

  8. #8
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    This is an old thread but it has the right title for me. My son has a 1992 Lumina with a 60 degree V6 and it has strange behavior which is getting worse. This car was my Dad's from new and we inherited it and then gave it to my son. It has about 85,000 miles on it and it runs good and starts easily. However after running for a while it seems to run out of gas and just sputters to a stop. Our local service folks won't touch it and say we need to go to a dealer for a diagnostic which seems unreasonable to me for a 1992 model. The folks who gave up on it said it might be burnt valves but that does not make sense to me since it starts easily and runs great for a while. I think it is somehow related to heat. The first time we had this problem we were driving at about 70 mph on I-95 in July and it just lost power and sputtered to an inconvenient stop. After it was towed to an inconvenient site it started right up the next day and the ignition was refreshed and things checked out but after we gave the car to my son it has happened more and more frequently. It is a FI model so I wonder if the fuel pump loses pressure when it gets warmed up. Anybody out there have experience with this little Chevy V6 FI engine? I am willing to put money into fixing this rather than buy another used car for my son but it stumps me since two garages have worked on this and come up with nothing so far. Any suggestions?

    Don Shillady
    Retired Scientist/teen rodder

  9. #9
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    Thanks DennyW! I would never have thought of the Cat but I know we need to check the fuel pressure. Maybe replacing the FI pump is a good idea anyway with 85,000 miles on the car. Any body else have an idea? DennyW usually has it dialed in and he may be the smartest guy in Illinois! I wish he was closer!

    Don Shillady
    Retired Scientist/teen rodder

  10. #10
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    DennyW, Thanks for that comment, it is worth checking out. I have been reading other stories on the Internet about 1992 Luminas and there are a lot of similar stories, some of which are due to the trans lock up stalling the engine by not downshifting so maybe a trans flush is in order but that doesn't explain the cutoff while running at 70 mph so I think your suggestion is worth checking out. The pump is inside the tank and is electric so it is a hassle to change but the external resistor should be easy to check. Your repair experience is priceless! The truth is that most of my experience has been in building modified engines, not very well, and then then not worrying about the fact that most of my rebuilds seldom made it to 50,000 miles now that I think back so the family car as a transportation device with high mileage is a bit beyond my experience. Even so am I right that the symptoms do not match a diagnosis of burned valves? If the valves were burned it would not run well at all? Note that these later models get pretty complicated and it will only get worse if/when hybrids become common. Thanks a bunch, you are a gem!

    Don Shillady
    Retired Scientist/Teen Rodder

  11. #11
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,605

    Quote Originally Posted by Don Shillady View Post
    Thanks DennyW! I would never have thought of the Cat but I know we need to check the fuel pressure. Maybe replacing the FI pump is a good idea anyway with 85,000 miles on the car. Any body else have an idea? DennyW usually has it dialed in and he may be the smartest guy in Illinois! I wish he was closer!

    Don Shillady
    Retired Scientist/teen rodder
    Don, I agree with Denny. Put the vacuum gauge on it and go for a ride down the highway. If vacuum slowly moves lower and lower I think you'll find your problem in the exhaust system. The 2 things I've seen most are a failed (plugged) converter and more rare but it happens, a collapsed pipe. I've seen a few pipes that have a inner pipe and it expands inside the outer pipe, without any room to expand, it collapses into the pipe interior, effectively blocking off any flow. No flow out = No fuel in.... I think you'll find your problem by measuring the vacuum. My 2 Cents! LOL

  12. #12
    TooMany2count's Avatar
    TooMany2count is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Cahokia
    Car Year, Make, Model: 48 Chevy 1ton Bus
    Posts
    2,486

    Quote Originally Posted by Don Shillady View Post
    DennyW usually has it dialed in and he may be the smartest guy in Illinois!

    Don Shillady
    Retired Scientist/teen rodder
    OMG Don you've done it now, this will go straight to Denny's head & he'll believe that ..joe
    Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE

    Two possibilities exist:
    Either we are alone in the Universe or we are not.
    Both are equally terrifying.
    Arthur C. Clarke

  13. #13
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    Just a report on this situation after allowing some time to see if the "fix" works. It turns out that we decided the first thing to check would be to flush the transmission since that was not done for over 25,000 miles. To my amazement the folks who drained the trans said it was 3 quarts overfilled! They said the symptoms we had could be caused by too much fluid. I wondered why it would not overflow but apparently there is room for that much trans fluid to be sealed in without burping out. Anyway after the flush and adding in the correct amount of fluid the symptoms have not returned, although my son still does not completely trust the car. Even so I think this simple mistake was the main problem. Why didn't the extra level show up on the trans dip stick? I thought I did check it "hot" but ultimately I did add the extra on more than one occasion thinking the trans was leaking and probably the trans was not hot enough to give a correct reading on the dip stick, but I find it amazing that I could not see the extra three quarts on the dip stick!

    Don Shillady
    Retired Scientist/teen rodder

  14. #14
    patconor is offline Banned Visit my Photo Gallery
    Join Date
    Oct 2010
    Location
    Georgetown
    Car Year, Make, Model: 32 Ford Harwood Roadster
    Posts
    21

    Quote Originally Posted by robot View Post
    Instead of a towel, I was taught to do the test on the exhaust pipe with a dollar bill....if it always blew away from the end of the pipe, the valves were OK, but if it sucked the dollar against the end of the pipe, that meant that it was going to suck many dollar bills out of your pocket.
    Thanks for that advice. You guys have a lot of info about tail pipe (well in the past ) . But thanks anyway, will keep these info in mind.
    Last edited by patconor; 11-10-2010 at 06:15 PM.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink