Right now, I have my fuel preassure regulator mounted to the drivers side inner fender, as alot of guy's do. However, is there a place to mount it, so it's alittle more concealed, or out of the way.

My delimma, I have a 67 GTO, I am using #8 AN line from the pump to the regulator, I am switching to a Offey dual quad intake, I have Holley 4106 Carb's. The linkage and the fuel inlets on the carbs are on the same side, so a carb mounted regulator will not work, the other side of the carbs has the vaccum secondaries , so the arms will be in the way on that side. It would be nice to clean up the engine compartment so it's not so cluttered.

What have the hot rod boy's here done?
Running #6 to the carbs.
any suggestions?