Thread: Hi Im Allen,,,New here
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
03-17-2006 04:39 PM #1
CHR Member
- Join Date
- Mar 2006
- Location
- Athens
- Car Year, Make, Model: 1989 chevy s10
- Posts
- 9
Hi Im Allen,,,New here
so i have a question for ya,,,,i have a 89 chevy s10 with a 4.56 gear,th350 turbo,3800 stall,hooker competition hedders large tube,M/T 28x10.5x15w et drags on it,10 pt roll cage,16 gallon fuel cell,5 pt harness,nolded racing seats,i run 1/8 mile,,thats the truck,,,,,I just built a new 385 for it,its got,bowtie heads with 1.45 springs,2.05 and 1.6 valves,and a set of NGK iridium spark plugs,victor jr intake,750 AED HP double pumper carb,super HEI, 1.6 procomp full roller rockers, a engine works solid 5.21-5.21 lift with 1.5 rockers,so i think its like 551 with the 1.6's, the bottom end has +40 keith black pistons,400 rods,400 crank,4 bolt main,m55HV oil pump,cloyes true roller timing chain set on +4.and a jeg's mini starter...I just started it a few minutes ago and MAN does it sound good!!!! but my question is how much HP and Tourqe do you guys think the motor will have???? thanks for you help
AllenLast edited by BigAl917; 03-17-2006 at 05:00 PM.
Drive it like you stole it!!!!
1989 s10
385 cuin,bowtie heads 2.05/1.65 valves,1.45 springs,ProComp 1.6 full roller rockers/stud girdle
kieth black pistons,m55hv oil pump
Engine Works 5.21/5.21 solid cam
cloyes tru roller timing chain set on +4,hooker hedders long tube,
victor jr.intake,AED 750 HP carb
Engine Works billiet HEI distributor 55,000 volt coil,3800 10" stall,350 turbo Tranny,4.56:1 gear posi,10 point rollcage,16 gal RCI fuel cell with sending unit,molded racing seats/5 point harness,B&M ratchet shifter,Auto meter tach and gauges,mickey thompson ET DRAG 28x10.5x15w
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-20-2006 04:24 PM #2
CHR Member
- Join Date
- Mar 2006
- Location
- Athens
- Car Year, Make, Model: 1989 chevy s10
- Posts
- 9
no one wants to take a guess??????looks like ill have to get it dynoedDrive it like you stole it!!!!
1989 s10
385 cuin,bowtie heads 2.05/1.65 valves,1.45 springs,ProComp 1.6 full roller rockers/stud girdle
kieth black pistons,m55hv oil pump
Engine Works 5.21/5.21 solid cam
cloyes tru roller timing chain set on +4,hooker hedders long tube,
victor jr.intake,AED 750 HP carb
Engine Works billiet HEI distributor 55,000 volt coil,3800 10" stall,350 turbo Tranny,4.56:1 gear posi,10 point rollcage,16 gal RCI fuel cell with sending unit,molded racing seats/5 point harness,B&M ratchet shifter,Auto meter tach and gauges,mickey thompson ET DRAG 28x10.5x15w
-
03-20-2006 05:05 PM #3
CHR Member
- Join Date
- Jan 2004
- Location
- Prattsville
- Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
- Posts
- 4,990
what's the bore/ stroke? I'll run it through my Dyno 2000, can't do it without the the bore/ stroke, because a 385 SB isn't listed, only 383You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project