Thread: need advice
Results 1 to 4 of 4
Threaded View
-
03-17-2006 05:17 PM #4
Drive it like you stole it!!!!
1989 s10
385 cuin,bowtie heads 2.05/1.65 valves,1.45 springs,ProComp 1.6 full roller rockers/stud girdle
kieth black pistons,m55hv oil pump
Engine Works 5.21/5.21 solid cam
cloyes tru roller timing chain set on +4,hooker hedders long tube,
victor jr.intake,AED 750 HP carb
Engine Works billiet HEI distributor 55,000 volt coil,3800 10" stall,350 turbo Tranny,4.56:1 gear posi,10 point rollcage,16 gal RCI fuel cell with sending unit,molded racing seats/5 point harness,B&M ratchet shifter,Auto meter tach and gauges,mickey thompson ET DRAG 28x10.5x15w
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build