Hybrid View
-
01-27-2006 08:41 AM #1
Converting a Th400 to a reverse valve body?
What's involved with changing a standard Tranny into a reverse valve body?
Is it as easy as just changing the valve body on the bottom of the tranny, under the pan?
Is a total rebuild needed?
Expensive?I am just learning as I go.
-
01-27-2006 09:03 AM #2
yes it is just the valve body and and governor and the front band and there is some things you can take out to that make the trans hit harder it should be re bulit so you do all the things that make it work good .i have all my400 trans this way for many years
-
01-27-2006 09:43 AM #3
I actually had it rebuilt last year, and I put a shift kit in it, But I am changing out the Hurst console shift and changing over to a B and M quicksilver. I t would make sense to yank it back, the slap it forward....I am just learning as I go.
-
01-27-2006 03:58 PM #4
my first reverse valve body is in my gto .i put it in 1981 like i said there is thing that will need to come out of the trans to make it work right .i would take out the wave plates out of the 1 and2 clutch packs if not done already
Damn, that's something I didn't want to hear. I'm glad I got to meet him and Rosie and Rick. I'm proud to have had him as a friend, RIP Johnboy
John Norton aka johnboy