Thread: Early HEMI
Results 1 to 15 of 24
LinkBack URL
About LinkBacksThreaded View
-
05-09-2005 07:21 PM #8
CHR Member
- Join Date
- Mar 2003
- Location
- SW Arizona
- Car Year, Make, Model: 68 Ply Valiant, 83 El Camino
- Posts
- 3,872
Part 3
At this point it is time it will be time to attach the bell housing so you can determine the final amount of material you need to remove. The picture below shows the SB Chrysler bellhousing bolt holes that will be used (marked with the Xs). The key is to have the bellhousing centered prior to drilling and tapping the holes (remember to drill and tap the holes deep enough to compensate for the material that will have to be further removed).
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!