Thread: to big block or small block
Results 1 to 15 of 16
LinkBack URL
About LinkBacksThreaded View
-
04-22-2004 10:25 AM #10
CHR Member
- Join Date
- Jan 2003
- Location
- Shelbyville, KY
- Car Year, Make, Model: 1983 Mustang Drag (Bracket) car
- Posts
- 40
428 block
Get you a 428 crank (Scat makes a stroker crank) and stroke the 390. OR I have a busted 428 block that needs Two sleeves and it's at .060 over now. You could sleeve it and fill it with block fill and you'll have 440 cubic inches of Torque twisting power. JMO. I used to run it. I have now switched over to 385 series engines.
Good LuckDamon Sea
"If it doesn't fit force it, if it breaks then it needed to be replaced anyway"
http://www.geocities.com/wildfire1mustang/damon.htm
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build