Thread: Effect of weight on 1/4 mile times

Tweet

Not that simple. A lot depends on how the two cars hook and launch, and the torque put out by the two different engines. HP is what we all talk about, but torque is what wins races.

The old rule of thumb was, for every 100 lbs you remove from a car you pick up one tenth second et, so 1000 lbs less equals 1 second faster time. Beyond that, my mathmatical skills run out.

Don

I'm not a pro drag racer, but have been around it all of my life.

Another thought that occurs to me... besides simply increasing power... is that the tires are gripping the asphalt, trying to accelerate the car's mass. But as weight increases, you may approach or surpass the limit of the tires "gripping" ability.

...of course there may be the option of bigger tires... :-)

Other advantages to light weight are the decreased stress on the drivetrain, and the potential to go even faster, when the power is increased... as you did in the heavier example.

Originally Posted by HOTRODPAINT

Another thought that occurs to me... besides simply increasing power... is that the tires are gripping the asphalt, trying to accelerate the car's mass. But as weight increases, you may approach or surpass the limit of the tires "gripping" ability.

There was a time when a "small amount" of wheel spin was to be expected .........

Procedures do change!

Why did this work as well as it did?

Jim

I have a Suzuki Samurai and a Jeep. The Jeep is 180hp 4k lbs and the Sanurai is 60hp 2300lbs. The Jeep runs a 33x15.50 and the Samurai runs a 31x11.50. Both are the same brand of tire, Super Swamper TSL. Now this aint drag racing but the Samurai will definately climb a muddy hill (level, no ruts just slick greasy) the Jeep will spin the tires more and will definately accelerate better. But the little light weight Samurai will climb better, hold a line better and not slide in off camber situtions. Weight plays a huge factor in how a car performs. I think in a weight distributing, traction perfect world, a 2300lb 7.9hp per lb car won't accelerate like a 400lb 7.9hp per lb. I have no scientific or mathmatical evidence but I would assume that the hp per lb would have to increase slightly. Maybe a small percent, like 7.9 to 8.1.

Dont forget the other factor....age.

Since I got old and fat, I cant run 1/4 mile without having
a heart attack!

mike in tucson

The 100 Lbs 10th of a second rule applies only if bothcars are making the same HP.

If both cars hook well and launch hard (within .002 @ 60 ft) they should theoretically run the same ET although the MPH may be different.

Why not just run them and find out?

Originally Posted by joe_and_jeep

I have a Suzuki Samurai and a Jeep. The Jeep is 180hp 4k lbs and the Sanurai is 60hp 2300lbs. The Jeep runs a 33x15.50 and the Samurai runs a 31x11.50. Both are the same brand of tire, Super Swamper TSL. Now this aint drag racing but the Samurai will definately climb a muddy hill (level, no ruts just slick greasy) the Jeep will spin the tires more and will definately accelerate better. But the little light weight Samurai will climb better, hold a line better and not slide in off camber situtions. Weight plays a huge factor in how a car performs. I think in a weight distributing, traction perfect world, a 2300lb 7.9hp per lb car won't accelerate like a 400lb 7.9hp per lb. I have no scientific or mathmatical evidence but I would assume that the hp per lb would have to increase slightly. Maybe a small percent, like 7.9 to 8.1.

i sold my old bbc 572 to some guys that ran it in a samurai they ran it in a mud pit with alot of Nos i would hate to see that run down the track

Originally Posted by pat mccarthy

i sold my old bbc 572 to some guys that ran it in a samurai they ran it in a mud pit with alot of Nos i would hate to see that run down the track

I have mine geared way down for RockCrawling, I'd like to put a ported rotary in it but the complete lack of lowend torque would suck in a crawling situation. Or a turbo EcoTec... But my 1.3L motors are dirt cheap

Originally Posted by joe_and_jeep

I have mine geared way down for RockCrawling, I'd like to put a ported rotary in it but the complete lack of lowend torque would suck in a crawling situation. Or a turbo EcoTec... But my 1.3L motors are dirt cheap

yep i did a eco tec were he lean abit to much on it with a blower blocks need a up grade on sleeves but rods and crank look good

If you are talking moving weight..... The more weight of the car, highest percentage, you can put on the rear the better. Better weight transfer, in theory, the better the car will hook up. Of course there are so many varriables it's hard to say. Like don said torque, torque, and you got to get it to the ground. You could have a 7hp per lb advantage over another car and if you blow the tires off......well guess who will come out ahead. Of course that's a drastic exageration, but you get the point. With any race car the lighter the better. Then if you have a weight minium you put it where you want it. And with a very light car, and no weight minium, you may find that adding weight to the rear, will make car hook up better and better et's.