Those are some very cool projects.

I'm still stripping the tar and felt out of the interior of the 36 Chevy project. That stuff is a pain in the arse. I tear loose any felt paper that I can. Then I use a heat gun and a scrapper. Once the felt is off, I use the heat gun and scrapper to get a layer of tar off. Then I go to a razor blade scrapper and get it down as far as I can.

Once the Tar and Felt are out completely, I'll be taking the fenders and body off to do the rear end, put in the cross member, and mount the engine and trans. SO... I have a lot to do over the remainder of winter. (although... spring is a long time away in Minnesota)

Jerome in Ham Lake, MN