Thread: Super Chevy Show MAple Grove

Tweet

That would be a great help if you could. You did a sbc conversion? If so then you prolyl ran into a lto of the issues I did. Any header problems? What kind of exhaust did you use, and which wiring did you keep? I assume you lost the smog crap? Also, the water pump bolts, are they bolts, or studs to mount brackets too, that is my main problem right now. Thanks

BTW, i musta been tired, but its not at maple grove, its englishtown this sunday, old time drags and funny car reuinion, ill be there

okay, i started with a z28 that came with a carburated 305 after pulling the motor i eliminated the comp. and all wiring going to it . i kept alternator starter oil pressure and water and distributor wires. i replaced the dist. with a 74 and older one the headers are the eldelbrock short tubes and collector pipe that i fabricated a pipe in place of the converter and im pretty sure i used the stock power steering pump it bolted right up to the block, the only thing i didnt use was the ac braket that bolts to the left head and exaust ill send pics tonite hope this helps
i wont make it to nj but i will be at geezers at the grove