Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree17Likes
  • 6 Post By 40FordDeluxe
  • 5 Post By astroracer
  • 3 Post By 36 sedan
  • 1 Post By cffisher
  • 1 Post By 36 sedan
  • 1 Post By Deuce4dad

Thread: Front suspension square with frame
          
   
   

Reply To Thread
Results 1 to 7 of 7
  1. #1
    rsinor's Avatar
    rsinor is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2020
    Location
    Tulsa
    Car Year, Make, Model: 32 Ford Vicky & 40 Ford dlx coupe
    Posts
    12

    Front suspension square with frame

     



    How do I confirm front suspension is square with frame. Can I use radiator mounts, firewall locating V? All inside frame reinforcements and cross members have been changed. Original 32 ford frame rails. Heidt super ride front suspension.
    Last edited by rsinor; 08-27-2020 at 07:10 PM.
    Roy
    ENJOY LIFE NOW........IT DOES HAVE AN EXPIRATION DATE, SO......
    LIVE WELL, LOVE MUCH, LAUGH OFTEN

  2. #2
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,297
    Blog Entries
    1

    Can you see any of these stock bolt holes in your frame? You can use them as reference points after you confirm your front frame horns and rails are true. These are good points that if not filled in already give you good reference points to go off of. I used a similar drawing to put new front rails on my 1940 frame. I went off of body mount holes and pre existing holes shown on the diagram to set up the new to it frame rail pieces.
    Attached Images
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  3. #3
    astroracer's Avatar
    astroracer is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Byron, Mi.
    Car Year, Make, Model: '88 Astro Van-BAD AST
    Posts
    871

    The above drawing is about as good as it gets to set up stock rails. The first thing you need to do is verify the chassis itself is square. If the front crossmember is missing the place to start would start with the cowl mounting holes. Pull diagonals off those back to the rear body mounts and make sure the numbers are the same for both of them.
    If money is the root of all evil... Women must be the fertilizer...
    Link to my BAD AST Build Thread:
    http://www.clubhotrod.com/suspension...van-build.html

  4. #4
    36 sedan's Avatar
    36 sedan is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2012
    Location
    american canyon
    Car Year, Make, Model: 36 Ford Sedan, 23 T Bucket
    Posts
    1,899

    If your chassis is on wheels, you can center line your floor and draw square lines (triangulate using a 3'-4'-5' or 6'-8'-10' formula off the center line) front and back where cross members go, then align the frame to the lines using plumb bobs from your frame down to the lines.
    Attached Images
    Last edited by 36 sedan; 09-14-2020 at 04:10 PM.
    Dave Severson, NTFDAY and cffisher like this.

  5. #5
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    built many buildings and set machinery
    using 345 method
    36 sedan likes this.
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  6. #6
    36 sedan's Avatar
    36 sedan is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2012
    Location
    american canyon
    Car Year, Make, Model: 36 Ford Sedan, 23 T Bucket
    Posts
    1,899

    If you just want a quick rough check to see if the front is square, you can triangulate with two equal lengths of string underneath and check spacing between the frame rails.
    Attached Images
    NTFDAY likes this.

  7. #7
    Deuce4dad is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2012
    Location
    Southern
    Posts
    116

    just noticed this is an old post
    Last edited by Deuce4dad; 01-16-2022 at 08:58 PM. Reason: old post
    rspears likes this.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink