Another Build Thread - My '32

[rspears]

Jim, on a Pete & Jake's '32 chassis, Show-Me roadster body - tape measure taped to top center of the rear drum I got 75" to the front edge of the firewall, and 91" to the center of the SBC motor mount. I can check again in a couple of hours when my grandson gets here to hang out, but those are real close from my "project".

With a "holder" and a straight edge I'd put the firewall at 75.25", and the motor mount more like 91.25". That's with a wood block square against the tube for the motor mount bolt, projected out a foot, measured straight back to the axle tube center to the center of the motor mount.