Thread: 53-56 f100 front brakes

Tweet

The Speedway kit should go straight on 37-41 spindles

Originally Posted by prpmmp

Hi all!! got a set off f100 front brakes to put on my 32,the bearing kit is from speedway. the inner bearing works with the hub(outside diameter of 2-11/16 for the race) the inside diameter for the spindle is 1-3/16,my spindle is 1-3/8,anybody know the # of the bearing i need? I think the spindles are from chassis engineering. thanks Pete

Originally Posted by roadster32

The Speedway kit should go straight on 37-41 spindles

Hi!! thanks for the reply!! found out that the CE spindle has a beefer boss to accept the bearing and race for the mopar rotor,don,t know if i can get a bearing to work or turn down the spindle from 1 3/8 to 1 3-16,or get new spindles with the ford diameter. thanks Pete

It would be cheaper to have your spindles turned down, its an easy job.

Originally Posted by roadster32

It would be cheaper to have your spindles turned down, its an easy job.

Hey!! That sounds great,did not know if that would be the way to go!! thanks!! How is the weather across the Atlantic?
Pete

It was excellent until you mentioned it !!!

Originally Posted by prpmmp

Hey!! That sounds great,did not know if that would be the way to go!! thanks!! How is the weather across the Atlantic?
Pete