Thread: Project Blue - 1932 3W Coupe Build

Tweet

Originally Posted by thenightbird

I don't plan to adjust and tighten everything up since I will disassemble for paint later....

Dan, here is a suggestion given to me regarding the nylon insert lock nuts supplied with the chassis components. Save those for final assembly since you don't want to use them over and over during the trial fitting. I took an inventory of every nylon insert nut on the chassis and took the list to a local nut/bolt supply house and bought regular nuts and lots of flat washers to use for preliminary mock-up. The cost was only about $20-25. Hope this helps.

Mike