Thread: questiion on 32 HiBoy
Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
-
12-07-2008 12:34 PM #2
CHR Member
- Join Date
- Apr 2005
- Location
- Ardmore
- Car Year, Make, Model: 32 Ford
- Posts
- 255
Scott. The very front edge of the cowl is even with the top edge of the frame. This lower edge of the body begins to curve down below the edge of the frame as much as 1inch and continues to overlap the frame as it blends back below the door through the fender opening. Just behind the fender opening, there is a gap between the frame and the body; no overlap here. "Deuce" may have pictures that will show this in his three window build. A lot of the highboys have a filler panel fabricated to fill this gap at the very rear of the body behind the wheel opening when the original tank is not used.Last edited by deuce4papa; 12-07-2008 at 12:42 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Yep. It’s pretty sad.
Dead!