Thread: When to replace tires?
Hybrid View
-
01-22-2008 10:25 AM #1
No sidewall or tread cracks? No separation bubbles? No handling issues? Probably still good.
Coker supposedly bought the molds and rights to make them. I find their site a pain to navigate so you'll need to do your own search.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
01-22-2008 10:37 AM #2
Nothing. They look perfect. Probably 15,000 miles on them. Had tires removed from Halibrand wheels yesterday to get them show polished. Inside of tires look great too. Just curious if there was a rule of thumb for replacing good tires.
I'll look over Coker's site tonight. Thanks!
-
01-22-2008 11:01 AM #3
One thing to consider is if the tires were mounted and sitting with the weight of the car on them for that long. I bought my '84 Crown Vic from the proverbial little old lady. The car had sat for four years before I found it, she had just put brand new Michelins on it, drove it home and parked it for the four years. Even the little rubber nubs were on the tires yet. Entire car only had 50,000 miles on it.
However, when I got the car running after it's long rest it drove like the tires were made of bricks! It hopped all over the place and even shook stuff off of the dashboard. Evidently the tires had taken a set and had flat spots on the bottom. I kept driving it, hoping they would round out, but they never did. 3 months later I had new ones put on and the problem went away. The tire shop told me once they take a set they are done.
Just so you might consider that.
Don
-
01-22-2008 02:13 PM #4
Originally Posted by Itoldyouso
Sounds like 5-7 years is the deal.- - even though it seems to be perpetuated by tire manufacturers. Imagine that!Last edited by Steves32; 01-22-2008 at 02:15 PM.
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40