The frame is notched, and there is 2 3/4" clearance between the top of the axle and the rubber bumper on the bottom of the SoCal spring bracket (which could be modified for more clearance). Mostly what I was asking is what would the effects be of removing the top 2 or 3 leaves? That would drop it about 3/4" plus whatever reduction of the arch of the remaining leaves that then resulted, but would it be too soft? The ride is pretty stiff now so that might not be such a bad thing. Others must have some experience with this??

As for a "super low spring", any recommendations? What I have was supplied by SoCal in OR, but knowing them it may not have been out of their catalog - they sourced from many different vendors.