Thread: Glass or steel- friend is 32 shopping

Tweet

IMO and I have built both but own a glass car. You will have the same money and time in each. He needs to decide what look he wants. Does he want the traditional old school look or more of a smooth look? Start there and also decide on how much he wants to drive and in what weather and go from that point

Originally Posted by iceburgh

He needs to decide what look he wants. Does he want the traditional old school look or more of a smooth look? Start there and also decide on how much he wants to drive and in what weather and go from that point

Great advice ... and on the mark.

Not everyone is a " roadster type "
Also different folks want different looks ...

I prefer the older traditional look ... a 32 Ford that looks like a 32 Ford. Others want smooth, cut, no hinges, no windshield frame ... car that somewhat resembles a 32 Ford ... without the first real 32 Ford part on them ...

There is room for everyone and their own style ... as long as it is SAFE ...

If he wants the old school, real 32 look ... he needs to look at Wescott or Brookville ... IF he wants smoothed off ... glued in windshield ect ... the other bodies will do.

Get the best of both worlds and build one of the new '32 convertibles by Dearborn Deuce (I think Downs has a fiberglass version which is less expensive). It is a roadster when you want one, and it has roll up windows and a pull up top so you can button it up and turn on the air or heat. If I was building a new car, I would seriously consider going this route. But I really love my Outlaw 3 window too much to sell it and build another car.

Roll up windows in a 32 roadster? I'll have to send him to Dearborns site to check it out. He's pretty much sold on a steel body now- for resale later.
His only problem is his size. He's 6'4 & about 275. Mine is a pretty tight fit for me at 6'1" but I tucked my glide seat back under the body for max room. With that top on the Dearborn- I don't know how much that will affect how far back you can place the seat. He would be more comfortable in a 33-34 but he's set on a 32.

He needs to actually sit in a DD, and better yet drive one, before he pulls the trigger. It's a well made body, with some nice features, but I couldn't enjoy one without some modification. I'm only 6', and the windshield and top are just in the wrong place for me in combination with the supplied seat.

A local guy in Tacoma got one of the first one's delivered. Shortly after he finished the car it was for sale. When asked why so soon he said he couldn't enjoy driving it because front visibility sucked. Others probably love it. I suspect it depends on an individuals proportions and expectations.

Btw, there are a couple steel '33/4 repop roadsters out there.

I rode in one ... a few months back ... it seemed like it was a good bit smaller or something than my original roadster. Headroom and looking out the windshield ... was cramped or smaller feeling ... the side to side and footroom was OK . The doors are about 3 inches longer

If he is 6'4" tall, you may want to investigate the 2 inch stretched '32 roadster bodies made here: www.showmerodandcustom.com. It would provide a little bit more leg room. I have not seen these bodies in person, so I cannot comment on how good they are. Perhaps someone else knows more about them.

Originally Posted by Deuce

I rode in one ... a few months back ... it seemed like it was a good bit smaller or something than my original roadster. Headroom and looking out the windshield ... was cramped or smaller feeling ... the side to side and footroom was OK . The doors are about 3 inches longer

How can a DD be stretched 3" beyond stock and be smaller than an original? Are the doors simply lengthened without actually making the cockpit longer, or what? I've never sat it one, but to me they just look "weird". The cowl looks too long, and the doors seem real "thick" and there's just something about them that doesn't look right to me. I do like the roof profile when the top is up, but that's about it.