.....THANKS Don & Big Truck Driver, It drives down the road straight as an arrow. Let go of the wheel & it still goes straight. Put on the brakes & it doesn't pull at all. After going over a bump it still goes straight so no bump steer. Everything seems to be tight when I turn the wheel, push on the front wheels, etc.. Actually the entire front end is brand new; shocks, ball joints, tie rods, etc... After reading the front end article it sounds like camber & I am really leary of letting anyone bend the front axle to try & fit it... And now that I think about it one thing that is probably off is the caster. I put front tires on that were at least an inch shorter & rear tires that are at least an inch taller. So that would throw off the caster... But then caster wouldn't wear the sides of the tires.... So it's probably to much toe in, I'll take it in & have it done... Thanks again, Bill