Quote Originally Posted by Henry Rifle
This is just a quick sketch of an idea. The lines down the center of the "tongue" represent a stiffener made out of some 1/8" or 3/16" flat steel. Use a Heim end on the bracket, and a urethane 4-bar end on the frame.
Jack,
A short thread highjack !!

I'm not going to get into the panhard vs watts discussion - I've used both - with sucess and have my opinions.

My question is what program are you using for the drawings you do? I'm looking for a reasonably priced program to do an occasional part layout but don't need an Auto Cad level.

Thanks